DAPAudio DS-CM-4, Руководство пользователя

Страница: 10 / 15

8
19. Record RCA Unbalanced Out
Use these to connect a recording device .
20. Channel 4 L1 RCA Input
Use to connect a line level device.
21. Channel 3 CD/PHONO Selector
Used to set the input level for the PH/L1 Input (29) to either phono or line level.
22. Channel 2 CD/PHONO Selector
Used to set the input level for the PH/L1 Input (31) to either phono or line level.
23. Channel 1 L1 RCA Input
Use to connect a line level device.
24. GND
Use to connect the ground wire of your turntable.
25. AC Inlet with integrated fuse holder.
This connector is meant for the connection of the supplied main cord. Connect one end of the power
cord to the connector, the other end to the mains, then turn on the power switch to operate the unit.
Note: Please make sure that the supply voltage matches the operation voltage before connecting
the unit to mains. Replace the fuse only with a fuse of same specification (T250mA).
26. Master RCA Unbalanced Out
Use these outputs to connect an amplifier with unbalanced inputs.
27. Channel 4 L2 RCA Input
Use to connect a line level device.
28. Channel 3 L2 RCA Input
Use to connect a line level device.
29. Channel 3 PH/L1 RCA Input
Use to connect either a Line level or Phono level device. Depending on the position of the Channel 3
CD/Phono Selector (21)
30. Channel 2 L2 RCA Input
Use to connect a line level device.
31. Channel 2 PH/L1 RCA Input
Use to connect either a Line level or Phono level device. Depending on the position of the Channel 2
CD/Phono Selector (22)
32. Channel 1 L2 RCA Input
Use to connect a line level device.
33. MIC 2 Jack Unbalanced Input
MIC 2 channel ¼” unbalanced microphone input.