DAPAudio DCX-36 MKII, Руководство пользователя

Страница: 8 / 25

6
Backside
Fig. 2
24. IEC Con Fuse 28. Output 3 XLR Male Socket
25. USB-Port 28. Output 2 XLR Male Socket
26. Output 6 XLR Male Socket 29. Output 1 XLR Male Socket
27. Output 5 XLR Male Socket 30. Input B XLR Female Socket
27. Output 4 XLR Male Socket 31. Input A XLR Female Socket
Installation
Remove all packing materials from the DCX-36 MKII. Check that all foam and plastic padding is
removed. Screw the equipment into a 19" rack. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage.
Install this device on a flat surface, not bending or curved.
Do not supply power before all components of the system are set up and connected properly.
Main Menu
Press the Menu (14) button, to enter the main menu. Select the desired submenu by pressing the Back (2)
or Next (3) buttons and confirm your setting with the Enter (4) button.
Xover submenu
1. Load a crossover
Select the desired program via the Parameter (17) knob and confirm with the Enter (4) button. You can
only choose from already stored programs.
2. Design a crossover
Select the desired setting via the Parameter (17) knob and confirm with the Enter (4) button.
DCX-36 MKII: Stereo 2-way, mono 3-way, mono 4-way
Stereo-Link
Only for stereo programs.
The stereo link links two outputs depending on the crossover type.
3. Store a crossover
You can save up to 10 programs. Press the Enter (4) button for saving. Select the desired program
number via the Parameter (17) knob. In order to move the cursor (e.g. for entering the next letter or
correcting the last letter), press the Back (2) or Next (3) buttons.
Confirm your entry by pressing the Enter (4) button.
4. Erase a crossover
Select the desired program via the Parameter (17) knob and confirm with the Enter (4) button.