DAPAudio D2250, Руководство пользователя

Страница: 27 / 43

13 14
9. 2-TRACK IN CONNECTOR
The 2- TRACK IN jack are 1/4
″
TRS unbalanced , with tip high and ring and sleeve tied together to ground.
Usually, you will have the 2TRACK INPUT connected to the output of your 2-Track master record.
10. EXTERNAL INPUT CONNECTOR
The EXTERNAL INPUT jacks are 1/4 ″ TRS unbalanced , with tip high, and ring and sleeve tied together to
ground . These inputs offer you the ability to listen to two mono or stereo sources directly without patching
through input channels.
11. MIX OUT CONNECTOR
These connectors transmit the MIX L/R outputs to the power amplifiers and/or the processing gear.
These XLR type outputs have a rated level of +4dB and impedance of 600 ohms.
12. MONO OUTPUT CONNECTOR
These XLR type outputs have a rated level of +4dB and impedance of 600 ohms.
The MONO OUT can be used for simple recording of a live performance, for driving a sub power amplifier , or
to check for phase cancellation.
13. TAPE RETURN INPUT CONNECTOR
The connections to and from your multi-track recorder are on the rear panel of the 8 Bus series.
There are 24, 32 Tape Return jacks and 24 Sub-master. The Tape Return jacks are 1/4 ″ TRS balanced, with tip
wired to high (+),ring to low(-)and sleeve to ground.
14. DC POWER INPUT CONNECTOR
Your 8 Bus console should ONLY be powered by the appreciate 8 Bus Power supply.
8 BUS MIXING CONSOLE
26