14
Ordercode: D1261
Core Kontrol D2
Setting a hot cue point in play mode
•
While in play mode, push the desired hot cue
(
cue 1 (01)/ cue 2 (02)/ cue 3 (03)
) button.
•
The hot cue point is stored while playback resumes.
•
The hot cue point will be indicated in the
waveform display
as shown in figure 8.
Fig. 08
(Hot) Cue Points
Deleting a hot cue point
•
Push and hold the
shift (04)
button while tapping the corresponding hot cue button (
cue 1 (01)
,
cue
2 (02)
or
cue 3 (03)
) to delete a hotcue point.
Cueing
•
"Cueing" is the action of preparing for playback.
•
Push the
cue
(09)
button, the player will enter cue mode, playback returns to the cue point and
the deck will enter pause mode, the
cue
(09)
button lights up and the
play/pause (11)
button
flashes. When the
play/ pause (11)
button is pushed, playback will start from the cue point.
•
If the
cue
(09)
button is pushed after searching operation or scanning operation, playback returns
to the cue point and the deck will enter pause mode.
NOTE
: While in cue mode, if the
cue (09)
button is pushed and held, playback will start from the cue
point, when the button is released, the player will automatically return to the cue mode, it allows you to
check the cue point.
Frame search
•
Frame search is a function for monitoring sound in a certain section of a song and for manually
changing position. Searching is used to set a start point with precision.
•
Turn the
jogwheel (32)
while in pause or cue mode to start searching.
•
While turning the
jogwheel (32)
, the point from which the sound output moves is a number of frames
corresponding to the number of the milliseconds and time display in the waveform display also
changes.
•
The search point moves in the forward direction when the
jogwheel (32)
is turned clockwise. When
the
jogwheel (32)
is turned counterclockwise, the search point will move backward.
Scanning (fast forward/fast backward)
•
The
needle drop sensor (17)
gives you a graphic visualization of the playing time of a current song.
Touching the sensor has the same effect as lifting up the pickup arm of a conventional turntable and
lowering it somewhere else on a record. E.g. touching the needle drop sensor in the middle will
continue playback in the middle of a song.
Changing pitch of a song
There are three tools available for changing the BPM of the song:
01) Use the pitch control fader to adjust the BPM.
•
Set the desired pitch bend range for the
pitch control fader (21)
by pushing the
pitch (18)
button.
Make sure that the
pitch control fader (21)
is not deactivated (off LED lit).
•
Adjust the BPM by sliding the
pitch control fader (21)
up or down.
•
Slide the
pitch control fader (21)
up to decrease BPM, or down to increase BPM. The adjustment
range is +/- 8%, 16%, 50% or 100% depending on the range, set up with the
pitch (18)
button.
Содержание Core Kontrol D2
Страница 26: ...25 Ordercode D1261 Core Kontrol D2...
Страница 30: ...29 Ordercode D1261 Core Kontrol D2 Notes...
Страница 31: ...30 Ordercode D1261 Core Kontrol D2...
Страница 32: ...2015 DAP Audio...
