DAPAudio CORE KONTROL D1, Руководство пользователя

Страница: 10 / 32

Ordercode: D1265
Core Kontrol D1
Names and Functions
Below is a description of the functions of the controls.
Deck Functions
01) Reverse button/pitch bend -
This button toggles reverse mode on or off. Reverse mode will play music in reverse and the track
time will also count backwards. While holding the shift (29) button, pushing this button allows you to
slow down a track. Release the button to return to the original BPM.
02) Hot cue/sample 2 button
The Core Kontrol D1allows you to store up to four hot cue points per deck. See page 14: “Setting a
hot cue point in pause mode” and “Setting a hot cue point in play mode”.
In sampler mode: While holding the shift (29) button, pushing this button allows you to start/stop
recording the corresponding sample. Pushing this button allows you to start/ stop sample playback
for the corresponding sample.
03) Hot cue/sample 1 button
The Core Kontrol D1allows you to store up to four hot cue points per deck. See page 14: ”Setting a
hot cue point in pause mode” and “Setting a hot cue point in play mode”. In sampler mode:
While holding the shift (29) button, pushing this button allows you to start/stop recording the
corresponding sample.
04) Pitch control fader
Use this fader to adjust the pitch. Slide up to decrease the pitch, slide down to increase the pitch.
05) x½/shift button
Allows you to divide the smart loop length by 2. While pushing and holding the shift (29) button,
tapping this button allows you to shift the smartloop by 1 beat.
06) In/beat loop button
This button allows you to set the start point of a loop. Tapping this button, while pushing and holding
the shift (29) button, will toggle the beat loop mode on or off. In beat loop mode, the software
makes a loop with a preset number of beats. The number of beats can be modified with the x½/shift
(05) button and/or the x2/shift (17) button.
07) Jogwheel
While not in scratch mode, the jogwheel allows you to pitch bend a song. In scratch mode the jog
wheel can be used for scratch effects. Pushing and holding the shift (29) button, while turning the
jogwheel, allows you to seek through the track (see page 14 “Seek”).
08) Cue/smart cue button
Push the cue button during playback to return to the position at which playback started or to the
first cue point (if set). Tapping this button, while pushing and holding the shift (29) button, allows you
to toggle the smart cue mode on or off. In smart cue mode, the software makes sure that your cue
point is always on the beat (actually a quantizing function). Smart cue mode is indicated in the
Virtual DJ software by the lock symbol which turns orange when active.
Fig. 06
09) Sync/master button
Automatically matches the corresponding deck’s tempo with the other deck’s tempo.
Pushing and holding the shift (29) button while tapping this button allows you to set up a deck as a
master for sync play.
10) Bleep button/pitch bend +
Bleep mode will play the music in reverse, while the track timer continues to advance. When you
release the button, the track will continue to play where it would have been if you had not engaged
the button. While holding the shift (29) button, pushing this button allows you to speed up the track.
Release the button to return to the original BPM.
11) Parameter 1 control
The Parameter 1 and 2 controls allow you to adjust effect parameters. Note, that not all the effects
require two parameter controls.
9