DAPAudio CORE KONTROL D1, Руководство пользователя

Страница: 11 / 32

Ordercode: D1265
Core Kontrol D1
12) Parameter 2/key control
The Parameter 1 and 2 controls allow you to adjust effect parameters. Note, that not all the effects
require two parameter controls. While holding the shift (29) button, this control allows you to change
the key of the song while the tempo remains unchanged.
13) Effects select encoder
Tapping this button allows you to select one of the available effects in forward direction.
The included Virtual DJ LE software gives you access to seven effects, as shown below.
Fig. 07
14) Samples button
Pushing this button toggles the sampler mode on or off. The button will light up to indicate
that sampler mode is active, Check with “sampler panels” (see page 23).
15) Hot cue/sample 3 button
The Core Kontrol D1allows you to store up to four hot cue points per deck. See page 14: “Setting a
hot cue point in pause mode” and “Setting a hot cue point in play mode”. In sampler mode:
While holding the shift (29) button, pushing this button allows you to start/stop recording the
corresponding sample. Pushing this button allows you to start/ stop sample playback for the
corresponding sample.
16) Hotcue/sample 4 button
The Core Kontrol D1allows you to store up to four hot cue points per deck. See page 14: “Setting a
hot cue point in pause mode” and “Setting a hot cue point in play mode”. In sampler mode:
While holding the shift (29) button, pushing this button allows you to start/stop recording the
corresponding sample. Pushing this button allows you to start/ stop sample playback for the
corresponding sample.
17) x2/shift button
Allows you to multiply the loop length by 2. While pushing and holding the shift (29) button, tapping
this button allows you to shift a loop by 1 beat.
18) Out/reloop button
This button allows you to set the endpoint of the loop or to exit loop playback.
While pushing and holding the shift (29) button, pushing this button allows you to reloop.
19) Key lock/pitch button
Tapping this button allows you to toggle the key lock mode on or off. In key lock mode, the pitch
fader allows you to Change the tempo of the song played back while the key of the song stays
unchanged. While holding the shift (29) button, tapping this button allows you to select the
maximum range for the pitch control fader.
Fig. 08
20) Scratch/cross fader curve button
This button allows you to select or deselect scratch mode for the jogwheel. While not in scratch
mode, the jogwheel is in jog mode. Pushing this button, while holding the shift (29) button, allows you
to change the crossfader curve.
21) Play/smart play button
This button allows you to toggle between pause mode and playback mode.
10