15
www.danvex.fi
4.1.2 Controller’s Interface
4.1.3 Parameters Setting
A. General parameters
• ON/OFF:
Short press
to turn on/off the controller: the small OFF appear in the top when the unit
is powered off and disappear after 3 minutes;
Short press
to exit during parameters setting.
• Fan Speed:
Press
to adjust the fan speed.
• Air Damper:
Press
to open or close the air damper.
• Mode Change:
Short press
&
simultaneously to change the available system working mode.
• Humidity Set:
Press
to reduce humidity, press
to raise humidity (1% changed each press).
• Temperature Set:
Only for the available system working mode.
• Filter:
Long press
&
simultaneously for 5 seconds to display the run time, wait for 5
seconds to exit,
Long press
for 10 seconds to clear the alarm and reset the time.
