Item #
OBL-00-008
Rev. 10-2017
Copyright ©2017 Danver, Inc.
Important.
Make sure hood is square to wall.
CARE & CLEANING:
Operating Controls:
•
Always activate the ventilator when using cooking appliances. Activate the ventilator a few minutes
before starting to cook to establish an airflow pattern within the area.
•
Adjust the fan speed as needed.
•
Adjust the dimmable halogen lights as desired.
WARNING!
Do NOT operate the blower / ventilator system without the filters in place, or
with dirty, grease laden filters.
ENERGY SAVING TIPS
: Do not operate the blower at a speed higher than necessary to remove
the cooking exhaust. Turn off the unit once the smoke and cooking odors have been
eliminated. Clean filters and grease laden surfaces often to improve efficiency.
Proper cleaning is necessary to maintain performance and appearance, while also ensuring safe operation.
The frequency of cleaning should be adjusted according to the type and amount of use. Best results will be
achieved by cleaning soiled components as soon as possible. Filters must be cleaned regularly.
•
Stainless steel surfaces should be cleaned with a solution of mild detergent and warm water. Rinse and
dry with a soft lint-free cloth.
Removal of Filters:
•
Remove one filter at a time by firmly pressing the filter up, then slide toward the front.
•
Slowly release the upward pressure and grasp the rear of the filter to remove it.
Cleaning of Filters:
•
The filters may be cleaned by hand washing in hot water using a mild detergent solution, or by placing
them in a dishwasher. Dry the filters completely before using again.
