Danube WED 10, Инструкция по установке, использованию и техническому обслуживанию

Страница: 94 / 105

50
6.3 Change block
This command allows for all the parameters of a block to be modified amongst those
created by the user. The steps to follow are the following:
¾
After selecting CHANGE BLOCK, press the ENTER key and the number of the first
available block will be displayed with its corresponding text:
CHANGE BLOCK
Block: 35
TEXT: Wash
¾
With the INC (
∧
) and DEC (
∨
) keys, the number of the block will be increased or
decreased. Once the block to be modified has been selected, press ENTER and the block
text is modified.
CHANGE BLOCK
Block: 35
Text: Wash
¾
With the INC (
∧
) and DEC (
∨
) keys, the character where the cursor is can be modified;
with the ADVANCE key (>>) the cursor goes on to the next character; the INFO key
changes from upper to lower case and to special characters. Press ENTER to validate the
selection.
CHANGE BLOCK
Block: 39
Text: Wash
Stop programme: Y
¾
With the INC (
∧
) and DEC (
∨
) keys, the values of the parameters are varied; with the
ADVANCE key (>>) the cursor goes on to the next parameter. Once all the parameters
have been modified, press ENTER.
Change block?
ENTER: Accept
ESC: Cancel
¾
If you wish to return to the previous menu you should press the ESC key.