Dantherm HPP-iw Series, Инструкция для владельца и по установке, Страница: 5 / 308

5 1007332 ISSUE 5
ACTIONS TO AVOID (OPERATION AND
HANDLING):
Be especially careful when handling the heat pump,
not to cause any damage that may result in leakage of
the cooling circuit.
Do not use means to accelerate the defrosting process
or to clean, other than those recommended by the
manufacturer.
Do not pierce or burn.
IN CASE OF FIRE:
Toxic fumes may occur in the event of fire. You must
leave the room as quickly as possible in the event of
fire.
LOCATION REQUIREMENTS:
The heat pump contains R32 refrigerant so the
following location requirements must be fulfilled:
The heat pump must be kept away from sources of fire
or naked flames.
The heat pump must be installed, operated and
stored where the floor area is larger than the minimum
requirement., see section 3.2.
The heat pump shall be stored in a room without
continuously operating ignition sources (for example:
open flames, an operating gas appliance or an
operating electric heater).
Keep the ventilation openings clear of obstruction
during operation.
Do not use or store combustible gas or liquids near the
heat pump.
Check if there are any local regulations, which
you must comply to, when installing or storing
the heat pump�
Be aware that refrigerants may not contain an
odour�