Dantherm HCV 3, Руководство пользователя

Страница: 24 / 88

22
Introduction
Overview
Introduction This is the user’s guide for the home ventilation unit HCV 3 and HCV 5 from Dantherm
Air Handling. The table of contents below lists the sections in this guide.
Serial number For any future inquiries regarding e.g. spare parts we kindly ask you to make a note of
the serial number of the unit here: ______________________
This instruction covers units with serial numbers equal to or higher than:
xxxxxx1128910
Warning
The power must not be connected until the ducting system has been mounted.
The ventilation unit should not be used to dry newly built houses during construction or
immediately after construction.
The ducts must be covered and the units must not be connected until the house is
ready for occupation, which means that the house is clean and dry. This is to prevent
any construction dust and condensed water from depositing in the ducting system
and
to prevent any sanitation inconveniences from the ventilation units later on.
Should this not be respected the warranty of the unit will be annulled and any kind of
maintenance will be done at the customers own expense.
Important Follow the instructions in this guide before you start op and use the unit!
Table of content This guide covers the following sections
Topic See page
General information 23
Description of the product 24
Functional description 26
Description of the control panel 29
User’s guide 31
Preventive maintenance 33
Accessories 34
Fault finding guide 37
Index 40