Dantel D18-05547 Series Скачать руководство пользователя страница 4

P

AGE

 4

05547-0798 <90-00047>

D

ATA

 A

PPLICATION

When you use the order wire system as a voice circuit, you dial a

preset number (station 1 code) to call someone at a remote

terminal. When you use the system as a data circuit, you dial a

different number (station 2 code) to call the same remote termi-

nal to set up a data communications path.
Here is how the data circuit works:

1.

Select channel 1 on the 41096 panel, then pick up the handset and

call the remote terminal (station 2 code). At the remote end, the

00330 order-wire terminal answers your call and operates an

M lead driver that opens a communications channel through the

44214 9600 BPS Modem.

2.

Select both channels 1 and 2 on the 41096 panel. This connects

your computer and external modem to the system. At the same

time the optical coupler (O.C.) circuit disables the sidetone in the

00330 order wire terminal so that the modem does not receive its

own data.

3.

Hang up the handset and start sending or receiving digital data.

4.

When you finish, press the # key to disconnect the modem at the

remote terminal. Release the channel 2 push button. You can ei-

ther release the channel 1 push button or leave it pushed in since it

is used for both voice and data communications.

O

FF

-N

ET

 A

PPLICATION

The 05547-03 option includes the B15-00331-00 DTSS3ON

Order Wire/PABX Interface (Off-Net) Assembly. This option

allows world-wide off-net access to virtually any telephone in the

world. The DTSS3ON allows any station in the order wire

system to dial an access line direct to a central office or through

a PABX, then dial out through the public-switched telephone

network (PSTN). In the same manner, an outside party can dial

into the order wire system and selectively dial any station

desired.

N

ETWORK

 I

NTERFACE

 A

PPLICATION

The 05547-04 option includes the A18-05723-01 Network Inter-

face shelf. Used in conjunction with the Off-Net shelf described

in the previous paragraph, the Network Interface Shelf allows

the user to access their network from a remote location on the

order wire system.

APPLICATION INFORMATION

Содержание D18-05547 Series



























Отзывы: