P
AGE
8
46517-92-1098 <90-00085>
Here is the System Parameters window:
To change the parameters:
1.
Use the Tab key to select the desired value.
2.
Press Enter.
If you do not want to change a value at a particular field, press
Enter to advance to the next field.
If you have changed some fields and all the remaining fields are
acceptable, press F8 to save the changes.
At the last field (Dial Type), if you change the value, press Enter to
save all changes to the system parameters. If you do not change the
value of the dial type, press Enter or F8 to save any other changes
to the system parameters.
NOTE:
If you change the LCD mode, you must exit the program to
DOS and restart the T/Shell program.
Here are descriptions of the System Parameters options:
LCD Mode - If you are using a monochrome monitor or a laptop
computer with a monochrome LCD display, select YES, use LCD
mode. If you are using a color monitor, select NO, do not use
LCD mode. This field defaults to NO, do not use LCD mode.
Menu Ver - The Menu Ver field allows you to configure the
method of opening menu options when using hot keys. A hot key
is a specific key that can select a menu option. Selecting YES,
use menu verification will force you to press Enter after you
press a hot key. Selecting NO, do not use menu verification
allows you to open an option just by pressing a hot key. This
field defaults to NO, do not use menu verification.
Dial Type - If your computer is connected to a telephone line,
select pulse or tone dialing. If your computer is not connected to
a telephone line, it does not matter whether you select pulse or
tone dialing. This field defaults to Tone Dialing.
GETTING STARTED
