DN9231
User's Manual
01A.03
Dante Security Inc.
34
setting for each channel and each view mode. If you want to put the OSD at a customized
position other than the corners of screen, select
normalized X,Y
for the
Predefined
option and
input the normalization value on the text box of X/Y. The normalization range of X and Y is
from 0 to 9999.
6.4.3. Audio
The decoder supports two-way mono audio. On the web page, you can configure the audio
input volume and output channel or volume.
Audio Output
The compressed audio stream can be sent to H.264 encoder only. To enable the audio output
from the decoder, select the Talk to the speakers of encoder channel check box and configure
the desired volume level. If you connect a microphone on the device and prepare an encoder
with a speaker, you can hear the input sound volume.
Audio Input
You to set the volume of capturing analogue audio generated at the camera installed site.
After the configuration of
Listen
, you can listen to the sound with a speaker connected to the
device. To listen to the captured sound, click the speaker (
) icon on the screen. If you
uncheck the box of ‘Enable capture and compression audio,’ it will disable the server to
capture the sound.
Note
i
The audio out stream from the decoder to an encoder is only available when
you select TYPE0 (H.264 encoder) for
Encoder Type
. TYPE1 or RTSP is not
supported.
6.5. Event Configuration
The products are equipped with the event server program internally and it enables you to
configure the event publishers and subscribers. For instance, DI, DO, Network loss, and health
of network server can publish the event message when an event is generated.
How to move to each subscriber setting page
Go to
Setup
>
Event Configuration
>
DI
, then the Publisher – DI page appears as below. Click
each subscriber name such as DO and you can find that they are linked to the related setting
pages. Refer to the figures of below for more specific information.