DN9231
User's Manual
01A.03
Dante Security Inc.
32
6.4. Decoder Setting
6.4.1.View
To set up how to display videos on the screen, go to
Setup
>
Decoder Configuration
>
Decoder
.
In this page, you can configure video display mode, screen margin, channel specification in
display modes, etc. Refer to the following for more details.
Checking video out format
On the top of the page, you can check the current video out standard format. A user cannot
change the format on the web page, but only by using the video output configuration switch
on the decoder.
Selecting display mode
To specify how to display the video image on the default screen, select the desired mode on
the View Mode option. In the Spot View mode, only one video is displayed on the screen. In
the Quad View mode, the evenly split four-windows appear on the screen.
Spot mode setting
Selecting the Spot mode will display the configuration options on the spot mode as below.
Select the channel you want to display in a single view. If you want to enable PIP, then select
the channel for PIP and defined its resolution and position. Afterward, check the Enable PIP
box and click the Apply button on the bottom of the page. The Switch PIP button is activated
only when the PIP mode is enabled. To switch the image that is displayed in the sub-window
with the full screen image, click the Switch PIP button.
Quad mode setting
Displaying all of the 4 channels in a view with high bitrate may be resulted in low quality
images. If you want to keep the best quality for a specific channel while having too much DSP
interference, give a priority on the channel by selecting its channel number on the following
option. This option will be enabled only when you select the Quad mode.