Dante DLI1971, Инструкция по установке и эксплуатации, Страница: 9 / 28

The dome conducts self-testing after current-carring,and it rotates slowly until displaying pan origin that is default
setting, then moving to tilt origin, the lens will be pulled far to near and near to far, when self-testing is finished, there
is relevant system information displaying on the screen, as follow:
The system enters into the main menu by 95preset or twice transfer 9 presesin 3 seconds . All the menu setting must
enter into the main menu at first.
Close
Increase
Reduce
Press TELE and WIDE at the same time, it means 3D joystick rotates joystick cap.
4.1.2 Call the main menu
4.1.3
Ø
Ø
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】 【 】
OPEN
FAR
NEAR
TELE
WIDE
.
“ ”
The information will not disappear until you stop to operate the system. If you set power up action , the dome
will automatically activate motions after self-testing. How to operate the function? We will explain detail introduction
in following passages.
when choosing pictures, it means to increase Iris; when setting menu, it means to enter into the
next menu or setting, or save after finishing setting
when choosing pictures, it means to reduce Iris; close to cancel.
Focus to far
Focus to near
magnification
magnification
Joystick to up: When choosing menu, it means to choose the former one; when choosing picture, it
means camera tilt up.
Joystick to down: when choosing menu, it means to choose the next one; when choosing picture, it
means camera tilt down.
Joystick to left: when choosing menu, it is equal with Close , when choosing picture, it means camera
tilt left
Joystick to right: when choosing menu, it is equal with Open , when choosing picture, it means
camera tilt right.
Back : Back to the former menu
Exit : Exit to menu
On : Open some setting
Off : Close some setting
“ ”
Menu and keyboard operation
Keyboard operation:
Menu operation
.
“ ”
“ ”
“ ”
Dome model
Proto col
Dome ID
Communication parameter
4. 1 Basic operation
4.System setting
System setting
6
4. 1. 1 Current-carring to dome and self-testing