LED Status Indicators
Power Indicator:
ON to indicate the power applied,
OFF to show that input voltage or the
inner circuitry may be faulty
Optical indicator: ON to indicate that the optical signal is
transmitted
Video indicator: ON to indicate video input
Data indicator:
ON to indicate data input/output traffic
ELECTRICAL SPECIFICATIONS
Video Input/Output Impedance
75Ω (unbalanced)
Video Input/Output Level
1Vpp nominal
Video Connector
BNC
Video Bandwidth
5Hz to 8MHz
Video Distortion
<0.7%
,
,
,
,
<0.7°
Weighted Video SNR
>67dB
Data Connector
RJ-45
OPTICAL SPECIFICATIONS
Transmitter Wavelength
1310nm/1550nm
Tx Transmitter Coupled Power
-6dBm SM; -12dBm MM
Rx Receiver Sensitivity
-23dBm SM; -20dBm MM
Optical Budget
17 dB
8 dB
Optical Connector
FC/PC SM; ST MM