background image

DA44AU

 USER MANUAL

04

www.blustream.com.au 

|

 www.blustream.co.uk

1

 Power Indicator LED - Illuminates when the unit is powered on

2

 Input Indicator LED - Illuminates when an analogue audio signal is detected on the associated input into the unit

3

 NET Indicator LED - Illuminates when the unit is receiving a Dante® network audio signal and audio is output

4

 Link Indicator LED - Illuminates when the unit is connected to PC configuration software

5

 48V Phantom Power Indicator LED - Illuminates when 48V phantom power is enabled on the associated input

6

 Output Indiciator LED - Illuminates when a Dante® audio signal is being received and output via the assosiated output 

7

 LCD Display - Shows the status of network connection and menu selection

8

 ESC Button - Escapes out of selected menu option

9

 Rotary Dial / Enter Button - Rotate dial to scroll through selected menu item, press to select current menu item

q

 Power button - Press to turn the unit on or off

Front Panel

1

2

4

6

7

8

9

10

3

5

1

 Power Port – Use included 12V/1A DC adaptor to power the device 

2

 Dante® Network Ports - 2 x RJ45 sockets to connect to Dante® network, note the DA44AU will only allow 1 network connection at 
a time, the device does not have two independent network interfaces. The 2nd RJ45 is for redundancy but can also be cascaded 
to additional DA44AU units (up to 7 x devices)

3

 RS-232 Port – 3-pin Phoenix connector to for control of the device from a computer or 3rd party control processor 

4

 4ch Audio Outputs - 12-pin Phoenix connector to connect to audio amplifier or mixing device, supports both balanced and 
unbalanced audio output from devices connected to the Dante® network (

Note:

 will not output audio connected to the input of 

the same DA44AU device due to limitations of the Dante® Ultimo chipset)

5

 4ch Audio Inputs - 12-pin Phoenix connector to connect to microphone or source audio device to convert the input signal to 
Dante® audio, supports both balanced and unbalanced signals including 48V phantom power

Rear Panel

2

3

4

5

1

Содержание BLUESTREAM DA44AU













Отзывы: