Dannmar MAXJAX TILT, Руководство пользователя

Страница: 5 / 28

4
IMPORTANT SAFETY INSTRUCTIONS
READ THESE SAFETY INSTRUCTIONS ENTIRELY
Do not attempt to install this lift if you have never been trai ned on basic automotive lift installation procedures. Stay
clear of any moving parts that can fall and cause injury.
1. READ ALL INSTRUCTIONS .
2. READ AND UNDERSTAND all safety warning procedures before operating lift.
3. KEEP AREA WELL LIT .
4. KEEP HAIR, LOOSE CLOTHING, FINGERS, AND ALL PARTS OF THE BODY AWAY FROM MOVING PARTS .
5. USE ONLY AS DESCRIBED IN THIS MANUAL . Use only
manufacturer’s recommended attachments.
6. DO NOT raise vehicle on the lift until installation is completed as instructed in this manual.
7. KEEP HANDS AND FEET CLEAR . Remove hands and feet from any moving parts. Keep feet clear of lift when
lowering. Avoid pinch points.
8. KEEP WORK AREA CLEAN . Cluttered work areas invite injuries.
9. CONSIDER WORK AREA ENVIRONMENT . Do not expose equipment to rain. DO NOT use in damp or wet locations.
10. ONLY TRAINED OPERATORS should operate this lift. All non-trained personnel should be kept away from
work area. Never let non-trained personnel come in contact with or operate lift.
11. USE LIFT CORRECTLY . Use lift in the proper manner. Never use lifting adapters other than what is approved by the
manufacturer.
12. REMAIN CLEAR of lift when raising or lowering vehicle.
13. CLEAR AREA if vehicle is in danger of falling.
14. ALWAYS ENSURE that the safety support jack is in place before any attempt is made to work on or near vehicle.
15. DRESS PROPERLY. Nonskid steel toe footwear is recommended when operating lift.
16. ALWAYS WEAR SAFETY GLASSES . Everyday eyeglasses only have impact resistant lenses. They are not safety
glasses.
17. MAINTAIN WITH CARE . Keep lift clean for better and safe performance. Follow manual for proper lubrication and
maintenance instructions. Keep control handles and / or buttons dry, clean and free from grease and oil.
18. STAY ALERT . Watch what you are doing. Use common sense. Be aware!
19. CHECK FOR DAMAGED PARTS . Check for alignment of moving parts, breakage of parts or any condition that may
affect its operation. Do not use lift if any component is broken or damaged.
20. NEVER remove safety related components from the lift. Do not use lift if safety related components are damaged or
missing.