Dannmar MAXJAX TILT, Руководство пользователя

Страница: 23 / 28

23
What variety of vehicles can I lift with the MaxJax Tilt?
FOR USE IN UNIBODY CONSTRUCTION VEHICLES ONLYFRAM
E CHASSIS MAXIMUM WIDTH IS 61”-
MINIMUM WIDTH 48”
The MaxJax Tilt will lift the vast majority of passenger cars. The lifting platforms are designed to slide in and out to
suit the sill widths or jacking points of most
passengers’ cars. MaxJax Tilt is intended to be used to lift vehicles
with unibody construction only. Do not use this product to lift or tilt vehicle with body-on-frame construction! The
manufacturer and seller are not responsible for any injuries or damages that are the result of usage while lifting
and/or tilting vehicles with body-on-frame construction. See Technical breakdown for details on platform
dimensions.
Can the vehicle tilt accidentally on it own when raised on the MaxJax Tilt?
No, the vehicle cannot tilt of its own while on the MaxJax Tilt unless the center of gravity changes. Consider that if
you remove a significantly heavier part of the vehicle, for example the engine, a heavy load in the trunk etc, the
center of gravity of the vehicle may change and the vehicle may tilt by itself. Always use the jack stand.
What is the maximum width of a vehicle for which the MaxJax Tilt can be used?
The MaxJax Tilt is equipped with adjustable platforms, they can slide to a minimum width of 48
” (1219 cm) and a
maximum width of 61
” (1549 cm). Note: The MaxJax Tilt can be used for all the vehicle types with a classic
chassis.
Why is there an up arrow on one gearbox and a down arrow on the other?
The arrows denote which gearbox is designed to raise the lift and which to lower the lift. If the drill used is a single
direction drill (only runs clockwise) the up-arrow gearbox will drive the lift up and the down arrow gearbox drives
the lift down. If the drill can run clockwise and counterclockwise
– the lift may be lifted and lowered from one
gearbox.
What drill power is required to lift the vehicle?
Use a drill with a minimum 10 Amp motor (120V). A lesser powered drill may strain or burnout while trying to work
the gears of the lift.
Can a vehicle be fixed in the horizontal position?
No, the vehicle cannot be fixed in the horizontal position. Warranty Voided if lift has been modified.
Can I use air tools?
No, it is forbidden to use any air tools. If air tools are used, the gear boxes will be damaged; the warranty does not
cover these types of damages. It is also forbidden to use any impact tools.
Can I use a cordless drill?
It depends on the power of the battery drill. If it is strong enough and if it is not an impact drill, then it can be used.
If an impact drill is used, the warranty will not cover any damages!
When is it necessary to use the riser bars?
Make sure the lift rests on a solid part of a vehicle to prevent any damage of plastic or fragile parts. It is
recommended to use beam pads when lifting vehicles with an extended plastic side skirt etc.
Can I drive over the MaxJax Tilt with the vehicle?
No. It must be placed under the vehicle from the side. WARNING: It is forbidden to drive over the MaxJax Tilt,
because it may cause damage to the vehicle and to the MaxJax Tilt as well. The warranty does not cover these
types of damages.
What are the dimensions of the space necessary to use the MaxJax Tilt?
5.5’ (1.65 m) from the side of the vehicle. For standard passenger vehicles, a garage with a height of 8’ (2.5 m) is
enough, but it always depends on the length and type of the vehicle. WARNING: Always check the height of the
ceiling before tilting the lifted car! Before you raise the vehicle, check your entire surroundings to make sure there
is plenty of working space so as not to hit any parts of the vehicle or ceiling etc. The manufacturer and seller are
not responsible for any injuries or damages that are result of incorrect usage while lifting and/or tilting.