P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PA G E 1 4
4. Touching the heating zone selection control, and then touch the “Timer”,
the timer is cancelled, and the “--” will show in the minute display.
5. When the time is set, it will begin to count down immediately.
The display will show the remaining time and the timer
indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding cooking zone
1.
If more than one heating zone use this function, the timer indicator will show the shortest
time. (e.g. zone 2# setting time of 3 minutes, zone 3# setting time of 6 minutes, the timer
indicator shows “3”).
NOTE: The flashing red dot next to power level indicator means the timer indicator is
showing time of the heating zone. If you want to check the set time of other heating
zone, touch the heating zone selection control. The timer will indicate its set time.
2. When cooking timer
expires, the corresponding
cooking zone will be
and show “H” .
NOTE: If you want to
change the time after the
timer is set, you have to
start from step 1.
(set to 6 minutes)
(set to 3 minutes)
