Daniela DAN10MPB, Руководство пользователя

Страница: 7 / 12

10. Note
1>The oven lamp will be on for all functions.(except pyrolytic function)
2> Once the cooking programme has been set and the" " button is not pressed within 5 minutes,
the current time will be displayed or turn back to waitting state. The setting program will be invalid.
3>The buzzer sounds when effectively pressed, if not effectively pressed there will be no response.
4> The buzzer will sound five times to remind you when cooking has finished.
D) When the pyrolytic function finished working and oven center temperature is lower than 300
O
C. LED
display will go off.
E) Before activating the pyrolytic cleaning function, remove any excessive spillage and make sure that
oven is empty. Do not leave anything inside it(e.g. pans, baking tray, dripping pan, slider bracket etc.)
as this could heavily damage them.
7
Note:
2> Press " " button to set cooking time and temperature. Then turn knob " K1 " to adjust time, and
Lamp, defrost can't be reserved.
During the status of reservation, press cancel button once, time and temperature of reservation menu
will be shown with menu icon lighting constantly. Press again, screen returns to clock, or press start
button to return to reservation status.
Reminder function is invalid during reservation status.
" K2 " to adjust temperature.
3> Press the " " button to finish cooking setting, and the clock will be on the screen with reservation
sign " " always lighting. But no other function signals are presented. Reservation time can be
checked by pressing " ", 3 seconds later the screen will show clock again.
4> At the time of reservation, cooking will start automatically after a buzzing sound. The reservation
symbol " " will put out, and other indicating signs will work normally.
11. Reservation F unction
1> To use reservation function, clock must be set in advance. Then, in the way of setting the clock,
reserved time that oven starts to cook must be set (a> Press reservation setting button " ";
b> Rotate " K2 " to set the hour time of reservation. Time should be within 0--23. c> Press
reservation setting button " " again; d> Rotate " K2 " to set minute time of reservation. Time
should be within 0--59.), but don't press clock this time. Next, turn knob " K1 " to chosse function.
1>
2>
3>