Daniela DAN10MPB, Руководство пользователя

Страница: 6 / 12

6. Reminder Function:
The oven has 9 hours reminder, this function will help to remind you to start cooking in a certain time
from1 minute to 9 hours. Only when oven in standby mode, the reminder can be set. Follow below to
set the reminder:
1> Press reminder setting button " ";
2> Rotate " K2 " to set the hour time of reminder. (Time should be within 0--9).
3> Press reminder setting button " " again;
4> Rotate "K2 " to set minute time of reminder. (Time should be within 0--59).
5> Press " " to confirm setting. ":" will be flash and the indicator for reminder " " will light.The time
counts down.
Note: The oven buzzer will sound for 10 times after the time back to the zero hour . " "symbol disappears
on the screen to remind you to start cooking. You can cancel the reminder during setting by pressing
the stop button; After the reminder has been set, you can cancel it by pressing stop button twice.
7. Start/Pause/Cancel Function
1> If the cooking time has been set, press " " to start cooking. If the cooking is paused, press " "
to resume cooking.
2> During cooking process, press " " once to pause the cooking. Press " " twice to cancel the
cooking.
8. Energy-Saving Function
1> During in waiting state and reminding state , press " " for three seconds, the LED display will go
off and set to energy-saving mode.
2> If no operation in10 minutes under waiting state, the LED display will go off and go into energy-saving
mode.
3> Under the energy-saving mode, press any key or rotate any encoder can quit the energy-saving mode.
9. Pyrolytic Function(only some modles)
This function allows you to clean thoroughly the oven cavity.
1>Rotate "K1" to select the pyrolytic function. LED will display "PyR".
2>Press " " to confirm the cooking. And the default time is 2 hours, "PyR" will display on the LED.
3>Rotate "K1" to change the pyrolytic time. There have two levers time can be selected"1:30 or 2:00".
Note: A) When the oven door is not closed, press start button will be invalid, LED display "Door","PyR."
B) When the oven center temperature is highter than 200
O
C,Press cancel button can return to waiting
state directly and the oven center temperature is highter than 300
O
C, press start botton, LED display
"Cool".
C) When open the door in normal working condition, the relay for heater will stop working, LED display
"Door", the buzzer will beep continuously until the door closed or press the cancel button.
6