SAFETY REVIEW
The Exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying this product.
Certain precautions should be taken when using electrical products. Please observe
the safety hints by reading the manual and obtaining qualified help if necessary to
adhere to the precautions.
1. Always use a properly grounded power supply cord with this product. Please do not
defeat the ground pin on the mains plug. This connection provides earth to the chassis
and signal grounds inside the device for clean and quiet operation.
2. Avoid high temperature operation in equipment racks by providing air circulation.
The number one killer of electronic gear is HEAT. Vented rack panels may look like
wasted space to an interior decorator, but they look like beauty to a technician or
equipment designer! If the front panel is hot, it is roasting inside the box.
3. Avoid areas of high magnetic fields. The steel chassis is designed to shield the
circuits from EMI and RFI (magnetic and radio interference). When installing equipment
in racks, it is prudent to put power amplifiers and large power supplies at least several
rack spaces, if not in a different rack, away from equipment that deals with low level
signals. Separation of high level and low level equipment can pre-empt trouble caused
by heat and EMI.
4. Care should be taken to avoid liquid spills around equipment. If a spill occurs, please
shut off the gear and disconnect the mains. A qualified technician should investigate
accidents to prevent further equipment damage or personnel hazards caused by spills.
5. If one is uncomfortable with opening gear and changing jumpers or making
adjustments, please seek qualified help if necessary.
6. If adjustments or jumper changes are required, please disconnect the mains plug
before opening the top. Dropped screws or tools on a live circuit board can manifest
themselves as burn marks and smoked components. While we feel your pain, (been
there) subsequent damage is not covered by the warranty.
Dangerous Music Group, LLC reserves the right to change the specifications or modify
the designs of its equipment. Registering online is our way of keeping in touch with
users of our equipment should this become necessary. Registration information is
always kept confidential and never disclosed to third parties for any reason. Company
contact information is on the last page of this manual.
The CE sign on this product signifies the fact that the
2-BUS-XT
® has been
tested and verified to conform to the applicable standards of 89/336/EEC.
EN55103-1 (emissions) EN61000-2 (immunity) and EN60065:2002 (safety re-
quirements)
This product uses components of the types and quantities that comply with
the EC RoHS standard 2002/95/EC. A list of suppliers and materials is avail-
able from DMG. We tightly control production to use top quality materials.
i |
DANGEROUS MUSIC
Содержание 2-BUS-XT
Страница 1: ...2 BUS XT 2 BUS XT USER GUIDE USER GUIDE...
