1 2
3
4
5
130BE129.10
Position
Quantity
Item
Comments
1
1
Eyebolt
DIN 580, C15, M12
2
1
Plastic cap
–
3
1
Hollow shaft cover with seal
–
4
3
Cover screw
DIN 6921, M12 x 30, tightening torque:
6 Nm
5
1
Adapter flange
(mounted to OneGearDrive)
–
Illustration 2.4 Assembly of the Adapter Flange to the ExtensionBox
5.
Fasten the adapter flange [5] with the adapter screws (supplied).
6.
Remove the eye bolt [1] from the ExtensionBox and the OneGearDrive.
7.
Fit the plastic cap [2] (supplied) to close the hole on the ExtensionBox.
8.
Fit the hollow shaft cover [3] to the ExtensionBox.
Refer to the
VLT
®
OneGearDrive Operating Instructions
for further information.
Installation
Installation Guide
MI75A102
Danfoss A/S © 02/2015 All rights reserved.
7
2
2
