MCD Modbus Module Instructions
Network Status LED
MG.17.F5.02 - VLT
® is a registered Danfoss trademark
3
5.
Network Status LED
The Network Status LED indicates the state of the
communications link between the module and the network.
LED operation is as follows:
LED
177HA263.
11
Off
On
Flashing
No connection or soft starter not
powered up
Communication active
Communication inactive
N.B.!:
If communication is inactive, the soft starter may trip if the Communications Timeout
function has been set on the module. When communication is restored, the soft starter
will require a Reset.