Danfoss VLT MCB 115, Руководство по установке

Страница: 4 / 16

1 Introduction
1.1 Purpose of this Installation Guide
This manual provides information for safe installation of a VLT
®
Programmable I/O MCB 115 option used in the VLT
®
FC drive series.
The installation guide is intended for use by qualified personnel only. Personnel must be familiar with the VLT
®
FC drive series.
Read and follow the instructions before installation, and ensure that instructions for safe installation are observed. Always keep these
instructions available with the drive.
1.2 Trademarks
VLT
®
is a registered trademark for Danfoss A/S.
1.3 Document Version
This manual is regularly reviewed and updated. All suggestions for improvement are welcome. See document version and changes
applied in
table 1 .
The original language of this manual is English.
Table 1: Version and Changes Applied
Revision date Remarks
2019.10 Option now also applicable for VLT® HVAC Drive FC 102 and VLT® Refrigeration Drive FC 103.
1.4 Additional Resources
More information resources are available to understand advanced drive functions and programming.
•
The VLT® FC Series Operating Guides provide information required to install and commission the drive for given applications.
• The VLT® FC Series Programming Guides provide greater detail on working with parameters.
• VLT® FC Series Design Guides provide detailed capabilities and functionality to design motor control systems for various
applications.
Technical documentation for other product options is available at www.danfoss.com .
1.5 Product Overview
1.5.1 Intended Use
The VLT
®
Programmable I/O MCB 115 is intended to:
Introduction
Installation Guide | VLT® Programmable I/O MCB 115
AN295938195323en-000101 / 130R0655
4 | Danfoss A/S © 2020.01