6-93 Terminal 42 Output Min Scale
Default value: 0%
Parameter type: Range
2-setup: All setups
Conversion index: -2
Data type: u_int16
Change during operation: True
Scale for the minimum output (0 mA or 4 mA) of the analog signal at terminal 42. Set the value to be the percentage of the full
range of the variable selected in
parameter 6-91 Terminal 42 Analog Output
.
Table 179: Range:
Min: 0%
Max: 200%
Default value: 0%
6-94 Terminal 42 Output Max Scale
Default value: 100%
Parameter type: Range
2-setup: All setups
Conversion index: -2
Data type: u_int16
Change during operation: True
Scale for the maximum output (20 mA) of the analog signal at terminal 42. Set the value to be the percentage of the full range of the
variable selected in
parameter 6-91 Terminal 42 Analog Output
.
Table 180: Range:
Min: 0%
Max: 200%
Default value: 100%
6-96 Terminal 42 Output Bus Control
Default value: 0
Parameter type: Range
2-setup: All setups
Conversion index: 0
Data type: u_int16
Change during operation: True
Holds the level of analog output if controlled by bus.
Table 181: Range:
Min: 0
Max: 16384
Default value: 0
6-98 Drive Type
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: u_int8
Change during operation: False
Table 182: Range:
Min: 0
Max: 0
Default value: 0
4.9 Parameter Group 8-** Comm. and Options
4.9.1 8-0* General Settings
8-01 Control Site
Default value: [0] Digital and ctrl.word
Parameter type: Option
2-setup: All setups
Conversion index: -
Data type: u_int8
Change during operation: True
This parameter overrules settings in
parameter 8-50 Coasting Select
to
parameter 8-56 Preset Reference Select
.
AU363928304090en-000101 / 130R0982 | 103
Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide