For B1 and B2 frame sizes, motor and relay connections are
located under the drive fuse block. To access these
connectors, loosen the three T-20 screws and move the fuse
block out of the way.
The fuse block does not need to be disassembled.
Illustration 1.3 Frame B1
1
Input power
2
Loosen screws
3
Drive fuses
4
Loosen screw
5
Motor (remove fuse plate to connect)
6
Relays
Table 1.3 Legend to
Illustration 1.4 Frame B2
1
Drive fuses
2
Loosen screws
3
Relays
4
Motor (remove fuse plate to connect)
5
Loosen screw
6
Input power
Table 1.4 Legend to
Installation Instructions
VLT® FC Series Internal Fuse Replacement
2
MI92D102 - VLT
®
is a registered Danfoss trademark
Содержание VLT FC Series
Страница 6: ...MI92D102 MI92D102 130R0543 Rev 2013 10 22...