3. “Pre-mounted” on Danfoss Bauer geared motors
•
A fixed combination of motor and electronics supplied by one
supplier
•
Easy mounting, only one unit
•
No need for screened motor cable
•
Clear responsibility regarding the complete solution
As the electronic parts are common - same function of terminals, similar
operation and similar parts and spare parts for all drives - you are free to
mix the three mounting concepts.
FCM 300:
4. Motor integrated (FCM 300 Solution)
•
Motor and drive perfectly matched
•
Optimised compact unit
•
No need for programming motor data
1.4.3 Configuring a Product
The decentralised motor control FCD 300 series are configured with a type code string (
see also Ordering
):
FCD 3xx P T4 P66 R1 XX Dx Fxx Txx C0
Mains voltage
FCD 300 is available for connection to mains voltage 3 phase 380-480 V.
Choice of frequency converter
The frequency converter must be chosen on the basis of the present mo-
tor current at maximum loading of the unit. The frequency converter's
rated output current I
INV.
must be equal to or greater than the required
motor current.
Typical shaft output
P
INV.
Type
[kW]
[HP]
303
0.37
0.50
305
0.55
0.75
307
0.75
1.0
311
1.1
1.5
315
1.5
2.0
322
2.2
3.0
330
3.0
4.0
335**
3.3
5.0*
*
at mains/motor voltage 3 x 460 - 480 V
**
t
amb
max. 35° C
1.4.4 Enclosure
FCD 300 units are protected against water and dust as standard.
See also the section entitled
Technical data
for further details.
1.4.5 Brake
FCD 300 is available with or without an integral brake module. See also the section entitled
Brake Resistors
for ordering a brake resistor.
EB version including mechanical brake control/supply.
VLT
®
Decentral FCD 300 Design Guide
1 The Decentral Concept
MG.90.S1.02 - VLT
®
is a registered Danfoss trademark
17
1
