1 Introduction
1.1 Purpose of the Manual
1.1.1 How to Read these Operating
Instructions
Please read this manual carefully for proper use. Incorrect
handling of the frequency converter may cause improper
operation of the frequency converter or related equipment,
shorten lifetime or cause other troubles.
These Operating Instructions will help getting started,
installing, programming, and troubleshooting the AFE 302.
, introduces the manual and informs
about the approvals, symbols, and abbreviations used in
this literature.
Chapter 2 Safety Instructions and General Warning
, entails
instructions on how to handle the AFE 302 correctly.
, describes the crane system
design associated with the frequency converters.
, guides through the mechanical
and technical installation.
, describes how to operate
and programme the AFE 302 via the Local Control Panel
(LCP).
1.2 Safety Symbols
The following symbols are used in this document:
WARNING
Indicates a potentially hazardous situation which could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which could
result in minor or moderate injury. It can also be used to
alert against unsafe practices.
NOTICE
Indicates important information, including situations that
can result in damage to equipment or property.
1.3 Software Version
VLT
®
Active Front End AFE 302
Operating Instructions
Software version: 1.15
1.4 Approvals
Table 1.1 Compliance Marks: CE and C-Tick
Introduction
Operating Instructions
4
Danfoss A/S © Rev. 05/2014 All rights reserved.
MG33X402
1
1
Содержание VLT Active Front End AFE 302
Страница 2: ......
Страница 75: ...Index Operating Instructions MG33X402 Danfoss A S Rev 05 2014 All rights reserved 73 ...