MG.60.C4.02 – VLT is a registered Danfoss trademark
21
VLT
®
6000 HVAC
■
■
■
■
■
Changing data
Regardless of whether a parameter has been
selected under the Quick menu or the Extend
menu, the procedure for changing data is the
same.
Pressing the [CHANGE DATA] key gives access
to changing the selected parameter, following
which the underlining in line 4 will flash on the
display.
The procedure for changing data depends on
whether the selected parameter represents a
numerical data value or a functional value.
If the chosen parameter represents a numeric
data value, the first digit can be changed by
means of the [+/-] keys. If the second digit is to
be changed, first move the cursor by using the
[<>] keys, then change the data value using
the [+/-] keys.
24.2
Hz
SETUP
1
FREQUENCY
205 MAX.
0000
5
0,000 Hz
The selected digit is indicated by a flashing
cursor. The bottom display line gives the data
value that will be entered (saved) when signing
off by pressing the [OK] button. Use [CANCEL]
to cancel the change.
If the selected parameter is a functional value,
the selected text value can be changed by
means of the [+/-] keys.
The functional value flashes until signing off by
pressing the [OK] button. The functional value
has now been selected. Use [CANCEL] to
cancel the change.
3.90 A
SETUP
1
MOTOR CURRENT
210 REFERENCE
■
50.0 HZ
FREQUENCY
209 JOG FREQUENCY
0
9
.0 HZ
SETUP
1
Infinitely variable change of numeric data
value
If the chosen parameter represents a numeric
data value, a digit is first selected by means of the
[<>] keys.
Then the chosen digit is changed infinitely variably
by means of the [+/-] keys:
The chosen digit is indicated by the digit flashing.
The bottom display line shows the data value that
will be entered (saved) when signing off with [OK].
50.0 HZ
SETUP
1
FREQUENCY
209 JOG FREQUENCY
1
0.0 HZ