Danfoss TGH285 Скачать руководство пользователя

Страница: 9 / 136

Proprietary Notice

This page contains proprietary information to Danfoss LLC. This publication is protected under the Copyright laws of

the United States of America (USA) and most other countries. This work is owned by Danfoss LLC, and was published

as of the most recent revision of this publication, as indicated on the Title page of this document. This document is

for the use Danfoss LLC customers and prospective customers only. Any use beyond that is prohibited.

Tests have demonstrated that equipment produced according to the guidelines provided in this manual will

function properly, however Danfoss LLC cannot guarantee the equipment to work in every physical, hardware or

software environment.

The guidelines provided in this manual are provided “AS-IS” without any warranty of any kind, either express or

implied, including, without limitation, any implied warranties of condition, uninterrupted use, merchantability,

fitness for a particular purpose.

In no event shall Danfoss LLC be liable for direct, indirect, special, incidental or consequential damages arising out of

the manufacture, use, or the inability to manufacture or use information contained in this manual, even if advised of

the possibility of such damages. In particular, Danfoss LLC is not responsible for any costs, including but not limited

to those incurred as a result of lost profits or revenue, loss of damage or equipment, loss of computer programs, loss

of data, the costs to substitute these, or any claims by third parties. In any event, the total aggregate liability for all

damages of any kind and type (regardless of whether based in contract or tort) of Danfoss LLC, shall not exceed the

purchase price of this product.

Danfoss LLC reserves the right to revise the publication at any time and to make changes to its contents without

prior notice or any obligation to notify former or present users of such revisions or changes.

Danfoss Turbocor Compressors Inc.
1769 East Paul Dirac Drive
Tallahassee, Florida 32310
USA
Phone 1-850-504-4800
Fax 1-850-575-2126
http://turbocor.danfoss.com

Encounter an error or see an opportunity for improvements while reading this manual? Email us at

[email protected] with a brief description.

* Subject to change without notice.

* Danfoss Turbocor’s commitment to excellence ensures continuous product improvements.

M-AP-001-EN Rev. S-9/8/2021 Page 9 of 136

Содержание TGH285









































































































































Результаты поиска

Содержание TGH285

Отзывы:

Похожие инструкции для TGH285

Бренды по названию

Популярные бренды

Danfoss TGH285, Руководство по применению и установке

Результаты поиска

Содержание TGH285

Отзывы:

Похожие инструкции для TGH285

Бренды по названию

Популярные бренды