![background image](http://html1.mh-extra.com/html/danfoss/series-90/series-90_service-manual_3856735056.webp)
Integral charge pressure filter
N25
N15
N20
N10
N40
N35
N36A
N36
N35A
11/16 in
37 N•m [27 lbf•ft]
11/16 in
37 N•m [27 lbf•ft]
Filter manifold lock nut
Lock nut torque
P106 182E
Pump control cover plate
Removal
1. Thoroughly clean external surfaces prior to removal of cover plate.
2. Using a 5 mm internal hex wrench, remove the six cover plate mounting screws (M90). Remove the
cover plate (M1) and gasket (M11) from housing. Discard the gasket.
C
Caution
Protect exposed surfaces and cavities from damage and foreign material.
Reassembly
Install a new gasket on the housing. Install the cover plate and install the screws. Torque the screws to
16 N•m [12 lbf•ft].
Install a sealing washer under the head of any mounting screws that are installed into through holes in
the housing.
Service Manual
Series 90 Pumps
Minor repair
56
520L0818 • Rev 0101 • August 2015