Standards for PVE
•
International Organization for Standardization ISO 13766 Earth moving machinery -
Electromagnetic
compatibility
.
•
EN 50014:1997 +A1, A2: 1999
•
EN 50028: 1987. For ATEX approved PVE
‒
IEC EN 61508
‒
ISO 12100-1 / 14121
‒
EN 13849 (Safety related requirements for control systems)
‒
Machinery Directive 2006/42/EC” (1
st
Edition December 2009)
PVE with connector variants
Hirschmann/DIN variant
Deutsch variant
AMP variant
Warnings
Please work through all warnings before implementing actuators in any application. The list of warnings
must not be seen as a full list of potential dangers. Depending on application and use other potential
dangers can occur.
Warnings are listed next to the most relevant section and repeated in a special section at the end of
technical data. See
for more information.
W
Warning
All brands and all types of directional control valves – including proportional valves – can fail and cause
serious damage. It is therefore important to analyze all aspects of the application. Because the
proportional valves are used in many different operation conditions and applications, the machine
builder/ system integrator alone is responsible for making the final selection of the products – and
assuring that all performance, safety and warning requirements of the application are met.
PVE series 4 introduction
PVE Series 4 is the common name for the Danfoss PVG electrical actuator. This technical information
covers our voltage controlled PVE and our current controlled PVHC actuator. For the PVHC please see in
the PVHC sectionl. The digital actuators PVED-CC and PVED-CX are covered in their special technical
information.
Technical Information
PVE, Series 4 for PVG 32/100/120 and PVHC
General Information
520L0553 • Rev GD • Jan 2014
7
Содержание PVE 4 Series
Страница 53: ...Technical Information PVE Series 4 for PVG 32 100 120 and PVHC 520L0553 Rev GD Jan 2014 53...
Страница 54: ...Technical Information PVE Series 4 for PVG 32 100 120 and PVHC 54 520L0553 Rev GD Jan 2014...
Страница 55: ...Technical Information PVE Series 4 for PVG 32 100 120 and PVHC 520L0553 Rev GD Jan 2014 55...