CS500 is equipped with: 1x Main connector (CAN bus, I/O, Power).
Main connector
The connector functions:
•
Connecting the device to the CAN bus network
•
Supplying the device with power
•
Local multifunction Inputs/Outputs
To avoid damage to the device, connect/disconnect the main connector only if the power supply to the
device is switched off.
To maximize the performance of the GPS receiver, mount the GPS antenna in a place where it is level with
the local geographic horizon and has full view of the sky above.
Power Supply / CAN Bus / I/O Connector 1
Pin
Designation
Description
1
Ground
Power supply
2
9 to 36 VDC
Power supply
3
CAN 1 High
CAN bus 1
4
CAN 1 Low
CAN bus 1
5
DIGIN1/CL15
Multifunction Input / Ignition
6
DIGIN2
DIN / Sensor Power
7
CAN 2 High
CAN bus 2
8
CAN 2 Low
CAN bus 2
9
MFIO1
Multifunction Input / Output
10
MFIO2
Multifunction Input / Output
11
MFIN1
Multifunction Input
12
MFIN2
Multifunction Input
Technical Information
PLUS+1® Connect CS500 IoT Gateway
Connector
16 |
©
Danfoss | October 2021
BC397226723595en-000101en-000101