![background image](http://html1.mh-extra.com/html/danfoss/pah-10-12-5/pah-10-12-5_disassembling-and-assembling-instructions_509003013.webp)
Service guide | Disassembling and assembling PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5
13
180R9095 | 521B0986 0 | DKCFN.PI.010.NA4.02| 06.2017
21. Mount the two O-rings in the flange and
the O -ring on the front cover.
20. Tighten the screws to a torque of 22 Nm.
23. Mount the washer with the edge pointing
upwards.
22. Wet the shaft seal with water and mount it
in the front cover. Ensure that it is pressed
to the bottom.
25. Fit the hollow bush onto the shaft.
24. Mount the spring.