![background image](http://html1.mh-extra.com/html/danfoss/pah-10-12-5/pah-10-12-5_disassembling-and-assembling-instructions_509003012.webp)
Service guide | Disassembling and assembling PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5
12
180R9095 | 521B0986 0 | DKCFN.PI.010.NA4.02| 06.2017
15. Place pin and place swash plate fittet on
guide pin and center hole.
17. Tighten to a torque of 10
±
1 Nm.
16. Place the screw in the center hole.
19. Press the housing down by hand and
insert the screws.
18. Mount the pump housing using the pin as
guide.
Alignment
hole
Guide pin