![background image](http://html2.mh-extra.com/html/danfoss/optyma-ico2/optyma-ico2_user-manual_3414537004.webp)
User Guide | Optyma™ iCO2
4 | BC408445719305en-000101
© Danfoss | Climate Solutions | 2023.01 | LCA012A030
[CXX]
Special display
Special
display
release
Button operation
Button operation
No operation for 10 sec.*
* If the special display is released in this period, [CXX] or [PXX] continues.
If specialdisplay occurs.
Auto feed
C9
(b) Display priority
1. Display priority is as shown by the following table.
Priority
Display content
High
↑
↓
Low
Receiving of line check command
[QO]
ROM version display
[WLMC], or other
Error display
[Exx]
Operation code display
[oPE-X]
Compressor oil check operation display
[oil]
Ordinary channel display
[Cxx][Pxx][xx]
2. If the state of the display at 1 is released, it changes to the auto display.
3. If SW8 or SW9 is pressed in the display at 1, it changes to display [C00].
4. However, if the switch is not pressed for 10 seconds, it displays by the priority of 1).
5. Display change : Special display shows other than CXX, PXX and FXX.
* If the special display is released in this period, [CXX] or [PXX] continues.