Danfoss MCV111B Series, Руководство пользователя

Страница: 6 / 9

6
SHOCK
50 g’s for 11 milliseconds. Three shocks in both
directions of the three mutually perpendicular axes for a
total of 18 shocks
VIBRATION
Withstands a vibration test designed for mobile
equipment control consisting of two parts:
1. Cycling from 5 to 2000 Hz in each of the three axes
2. Resonance dwell for one million cycles for each
resonance point in each of the three axes
Subject to acceleration levels of 1 g to 46 g’s
Acceleration level varies with frequency
Two wiring styles are available: MS and Packard Weather-
Pack. The MS Connector (MS3102C14S-2P) has four pins.
See the MS Connector Diagram for pin locations. (Note: The
device MS connector is not field replaceable.) See the
Electrical Characteristics section for pump phasing.
Mating connectors must be ordered separately. For the MS
connector order part number K08106. The mating Packard
ENVIRONMENTAL
HUMIDITY
After being placed in a controlled atmosphere of 95%
humidity at 49
°
C (120
°
F) for 10 days, the EDC will
perform within specification limits.
Meets MIL-STD-810B
WIRING
connector is a bag assembly part number K03384,
comprised of :
1. 4, 14-16 gauge sleeves
2. 4, 18-20 gauge sleeves
3. 1 plastic housing
4. 4 green cable seals (accept 2, 2-2, 8 mm wire diameter)
5. 4 gray cable seals (accept 2, 81-3, 49 mm wire diameter)
6. 4 blue cable seals (accept 3, 50-4, 21 mm wire diameter)
See Ordering Information.
MS CONNECTOR PACKARD CONNECTOR
D
C
A
B
Pin Orientation of the Optional MS Connector. This Part
is not Field Replaceable.
A
B
C
D
1276 1622
Pin orientation of the optional Packard Weather-Pack
connector. Part number K03384.
PACKARD CONNECTOR CRIMP PACKARD CONNECTOR PARTS
Crimp Location and Distance from Tang to Third Rib of
Packard Weather-Pack Connector.
Packard Weather-Pack Interlocked Connector Halves
with Parts Identified.
1077 1792
BLN-95-8995-4