Installation Guide Danfoss Link™ HC
Danfoss Heating Solutions
VIFZL402
06/2013
9
5.6
Performing a network test after adding new devices
After finishing installation, perform a network test to ensure that communication between
added devices and the Danfoss Link CC™ is stable.
Note!
Do not perform the network test before the Danfoss Link
™
CC is mounted in its final
position.
?
1
?
2
?
3
At the end of the network test the Danfoss Link™ CC awaits for all battery operated devices
to wake up and report. Follow the instructions given on the screen. If the network test is
running smoothly, there will be no need for further interaction. If the network test is per-
forming slow, the Danfoss Link™ CC guides through troubleshooting and gives useful tips
for speeding up the process.
5.7
Leaving the service area in Danfoss Link™ CC
Press the
SETUP
pin for 3 seconds and put back the front cover to the Danfoss Link™ CC.
6. Maintenance
6.1
Removing an output
?
1
?
2
?
3
?
4
?
5
?
6
?
7
Service Options
Rooms and Devices
Rooms and Devices
Manage Devices
Select Room
Select existing room
Configure Room
Room devices
Room Devices
Remove a device
Room Devices
Remove an output
Service Options
Status and Diagnostics
Status and Diagnostics
Network
Wireless Network Status
Start Network Test
Remove Output
Yes, remove output now