Service instruction
Disassembling and assembling iSave 21
10
180R9219 / 521B1171 / DKCFN.PI.003.K3.02 / 11.2013
21. Mount all bolts in the flange and tighten
them to a torque of 30 Nm ± 3 Nm.
20. Position the port flange over the guide pin.
22. Wet the shaft seal with clean filtered water.
Do not use silicone grease .
Fit the shaft seal with the carbon surface upward.
17. Position the port plate over the guide pin.
19. Change the O-ring in the flange and
position the guide pin.
O-ring
Guide pin
18 Check that the port plate fits the center
bearing and the guide pin.
