Danfoss ET6300, Руководство оператора

Страница: 27 / 44

9. Insert the block (3).
10. Tighten the clamping screw (4).
Make sure that clamp has been installed correctly and securely.
Check the correct (non-reversed) arrangement of the types by me-
tallic mirror.
5.2.4 Embossing with steel type holder, double-row without wheels
1. Insert steel types (1) in steel type holder. Neutral types allow a
space to be left between the markings.
2. Tighten the clamping screws (2).
3. Loosen the clamping screws (3).
Make sure that clamp has been installed correctly and securely.