Danfoss ET6300, Руководство оператора

Страница: 20 / 44

3. Mount the bearing block (5) to the chassis (6) using cylinder
bolts (4).
4. Use appropriate bolts to mount the machine on four of the eight
holes Ø 13 (1) in the machine bench.
Place the machine in a way so that it is easily accessible for
maintenance work from all sides.
5. Check the machine for damage.
6. Dismantle the transport securing device on the guide carriage.
Cut the cable tie and remove the padding.
7.
Train the operating staff and record training sessions in “Decla-
ration of trained staff”, Section 9.