Danfoss ET6300, Руководство оператора

Страница: 25 / 44

5. Turn the hand wheel (5) until the steel types (4) are in contact
with the work piece.
6. Remove the workpiece from the machine.
7. Turn the hand wheel (5) counter-clockwise to the stop by a half-
turn.
8. Position the work piece on the bearing blocks (3).
9. Use the operating lever (1).
10. Remove the workpiece from the machine.
11. Check the forming dimension after the first forming process.
Correct the embossing depth by turning the hand wheel.
The set value may be read on the scale of the vertical guide to be
re-used for identical work pieces later.