Danfoss
ET4000 Crimp Machine Operator’s Manual
8 | © Danfoss ET4000 Crimp Machine Operator’s Manual | 2023.02.
AQ439269047772en-000101
Operating Instructions (-20 thru -32 Collets) for
Heavy 4-Wire and 6-Wire Fittings
Using ET4000AR-002
1.
OPEN the pusher halves.
2.
PULL the pusher knob upward.
The pusher knob is located
behind the top of the pushers
near the back of the machine.
3.
SLIDE pushers to side while
holding the pusher knob up.
4.
PULL spacer ring locator
bracket upward. TURN the
locator bracket 90˚.
5.
REMOVE the base adapter ring
from base plate and PLACE the
ET4000AR- 002 base adapter
ring inside the base plate.
NOTE: Lubricate the outside
diameter of base adapter ring
before placing into the base
plate.
