The electric machine can include some of the options available. The options of the electric
machine are shown also in the rating plate, following the frame model code. Note! Only options
that differ from the standard delivery are indicated. Following options are used, see Table below.
For detailed information of the models, options and characteristics, see product data sheets.
Table 2. EM-PMI540-T1500 options
Feature
Option Standard
option
Explanation
High voltage
connections
-DUAL
2 connection boxes each containing one 3 phase system with
one M32 cable gland per phase
Connection
extension
*
x
None
+CE1
2 connection boxes each containing one 3 phase system with
two M32 cable glands per phase
N-end attachment
*
x
None
+NE4
Male shaft, no ange. DIN5480 W55x2x30x26x8a
Bearing insulation
*
x
Bearing types according to BHS
+BIN
SKF 6214 insulated bearing in N-end
+BIA
SKF 6214 insulated bearing in both ends
Shaft grounding
*
x
No shaft grounding
+SG1
In-built grounding ring
Rotation sensor
(resolver)
*
x
No rotation sensor
+RES1
In-built non contacting resolver, 8-pole pair
Winding
temperature
sensor
*
x
3 x PT100 in the windings
+TEMP4
6 x PT100 in the windings
Bearing
temperature
sensor
*
x
No temperature sensors
+BTMP1
PT-100 in bearings with plug in connector
Anti-condensation
heaters
*
x
None
+HEAT1
230VAC/50W
Conformity according to standards
The electric machine has been designed to be in conformity with the following directives and to
meet the requirements speci ed in the following standards:
Table 3. Applicable Directives and standards
Standard
Explanation
Low Voltage Directive 2006/95/EC
(until 19.4.2016) and Low Voltage
Directive 2014/35/EC (from
20.4.2016 onwards)
Electrical equipment means any equipment designed for use with a
voltage rating of between 50 and 1000 V for alternating current.
This electric machine is subject to the Low Voltage Directive
2006/95/EC or 2014/35/EC.
Machinery Directive 2006/42/EC
This electric machine is partly subject to the Machinery Directive
2006/42/EC and it is considered as partly completed machinery, as a
part of the nal machinery.
IEC 60034-1:2010
Rotating electrical machines - Part 1: Rating and performance
EM-PMI540-T1500
1. General information
| BC265856800806en-000106
©
Danfoss | Produced By: Danfoss Power Solutions | January 2019 | 5
Содержание EM-PMI540-1500
Страница 1: ...User Guide Motor Generator EM PMI540 1500 danfoss com...
Страница 69: ......