![background image](http://html1.mh-extra.com/html/danfoss/em-pmi540-1500/em-pmi540-1500_user-manual_3429206033.webp)
Cooling connections
Make sure that cooling liquid runs freely into and out from the machine.
Connect the electric machine properly to the cooling circuit. Ensure that the coolant ow is equal
or higher than rated and the coolant temperature at the inlet of the machine cooling is lower or
equal to the rated temperature. For more information, see Chapter
Recommended coolants
and
product data sheet. Rated values can be found in the electric machine rating plate.
It is recommended to use coolant connector equipped with o-ring seal or to use sealing washer
(for example Usit or Bonded seals) in the connection. In addition, it is recommended to use thread
sealant (Loctite 577 or similar) at the coolant connections to prevent loosening. Loosening can be
caused by vibration or temperature variations.
The electric machines are equipped with at least three PT100 temperature sensors in the windings.
The amount of the sensors depend on the options chosen. The temperature signal(s) can be read
out from the measurement connector of the machine.
You can connect the temperature signal to the temperature monitoring pin in the inverter (EC-C)
and make sure that the inverter has the machine temperature protection feature activated.
Electrical installation
Power connections
High voltage connection
Risk of electric shock when connection box is open. When you work with power connections make sure that electricity is
disconnected and shaft rotation is prevented.
The high voltage cables of the electric machine are connected to the connection box, or
connection boxes of the machine. Figure below shows the components of the high voltage
connection box assembly.
1. Remove the cover of the terminal box.
2. Install the power cables according to the wiring diagram.
3. Replace the cover of the terminal box.
EM-PMI540-T1500
6. Installation
32 |
©
Danfoss | Produced By: Danfoss Power Solutions | January 2019
| BC265856800806en-000106
Содержание EM-PMI540-1500
Страница 1: ...User Guide Motor Generator EM PMI540 1500 danfoss com...
Страница 69: ......