Figure 26. Rotor assembly tool (8) assembly
11
Enerpac BRD-46 hydraulic cylinder
12
M10X25 DIN 912 screws, 4 pcs
13
Enerpac retainer nut
14
Enerpac BSS5904D ange mount
15
Assembly tool cylinder holder
1. Install the rotor assembly tool (8) on the rotor (3).
2. Lift the rotor next to the frame / stator connection interface (1) with the rotor connection
interface (2).
3. Attach the assembly tool on the frame / stator connection interface with screws (15).
4. Connect a hydraulic hand pump to the Enerpac BRD-46 hydraulic cylinder (11) of the rotor
assembly tool.
5. Pump pressure in Enerpac BRD-46 hydraulic cylinder with the hydraulic hand pump until the
rotor, frame / stator connection interface and the rotor connection interface are rmly
together.
6. Fasten the rotor on the rotor connection interface with screws (6).
7. Remove the rotor assembly tool (8) and the rotor bracket when most screws are in place.
8. Install the rest of the screws as the rotor bracket prevents some of them being installed.
EM-PME375
6. Installation
| BC265857345808en-000101
©
Danfoss | Produced By: Danfoss Power Solutions | July 2019 | 39
Содержание EM-PME375 Series
Страница 1: ...User Guide Integrated Motor Generator EM PME375 danfoss com...
Страница 60: ......