© Danfoss | Climate solutions | 2023.07
Mounting/Demounting
Mounting :
The unit can be mounted onto a 35 mm DIN rail simply by snapping it into place and securing it with
a stopper to prevent sliding. It is demounted by gently pulling the stirrup located in the base of the
housing.
1
2
3
“Click”
Driver input
Terminal to use - signal Input A
Terminal to use - signal Input B
Voltage A / Voltage B
Ext. GND + PeA
Ext. GND + PeB
Current A / Current B
GND + PeA
GND + PeB
Voltage A / Current B
GND + PeA
GND + PeB
Current A / Volatge B
GND + PeA
GND + PeB
See below table with recommended connection terminals for driver function
AN433741508202en-000203 | 5
